One way for our company to ensure the reliability of products is to insist on formulating the quality assurance terms of oil to water heat exchanger, shell heat exchanger, tube type heat exchanger. We have been serving customers in the industry for many years and have rich experience in the industry. We warmly welcome you to contact us and please feel free to contact us. Our goal is to meet the needs of our customers and provide first-class pre-sale and after-sales service for new and old customers, and take this as a starting point to develop towards a higher and broader market.
Packaged plate heat exchanger
The material, quantity, size and arrangement of the plate depend on the operating condition. The gasket is located in the gasket groove around the plate. Around the opening, the gasket is a double ring shape, which can prevent the two media from leaking to each other. When the gasket is damaged, the medium is directly drained out of the heat exchanger.
After the plate heat exchanger is clamped, because of the sealing and isolation of the gasket, through the channel hole of the plate, two different media can be in two alternate channels, reverse flow, exchange heat with each other. The special design of shuripu plate can greatly improve the heat transfer efficiency.
Material Design and Selections
Material Selection | ||
Plate Material | SUS304, SUS316L, SMO254, Ti, Ni, Hastelloy |  |
| Gasket Material | NBR, HNBR, EPDM,Viton/Flurorubber,Chloroprene, Silicone Rubber |  |
| Frame Material | Carbon Steel, Stainless Steel |  |
| *For specific requirements, please contact us for confirmation | ||
Product Advantages
●Safety
●High heat transfer efficiency
●Small floor area
●Cost-effective
●Low fouling coefficient
●Convenient cleaning
Plate and Frame Heat Exchanger
Applications
Waste Heat Recovery
Food & Beverage
Petrochemical Industry
Mining Industry
Water Heating
Real Case Show 
For example, when the flow rate corresponding to the determined heat exchange area in the table is twice that of the flow rate used, the flow rate in the heat exchange runner can be doubled to reach the appropriate flow rate by adopting the dual-flow assembly form. The two flow channels can use different flow numbers according to different flow rates. As the number of processes increases, so does the resistance. For heat exchangers heated by steam, the steam side should generally be installed in the form of a single flow, in order to facilitate the full entry of steam and smooth discharge of condensed water.
Other Information
Please contact us
Contact: Ms.Luna
Email:luna@tranp.cn
In order to create higher added value, our company insists on improving the technical content of 300CMH Energy Recovery Ventilator Erv HVAC Floor Standing production and high standard processing. Throughout the expansion, we have remained focused on our core philosophy that creativity and quality design together with a rapid response to market demands will yield profitable results. We take one-to-one service to our customers, and tailor-make the product equipment and the whole set of solutions for each customer to suit your needs.