Creating a first-class enterprise and producing first-class copper brazed plate heat exchanger, most efficient heat exchanger, fin and tube heat exchanger, our company is forging ahead in the fierce market competition. We have always been adhering to the corporate tenet of 'establishing business with integrity, innovating continuously, and developing enterprises with morality', and strive to upgrade our products to the international leading level. We uphold the corporate philosophy of 'symbiosis', and our goal is creating world-class products, developing towards diversification and globalization. Our company has modern production enterprise's product testing equipment and high level of inspection personnel. We hope that the enterprise and all stakeholders can win together and share the fruits in a harmonious state.
Packaged plate heat exchanger
The material, quantity, size and arrangement of the plate depend on the operating condition. The gasket is located in the gasket groove around the plate. Around the opening, the gasket is a double ring shape, which can prevent the two media from leaking to each other. When the gasket is damaged, the medium is directly drained out of the heat exchanger.
After the plate heat exchanger is clamped, because of the sealing and isolation of the gasket, through the channel hole of the plate, two different media can be in two alternate channels, reverse flow, exchange heat with each other. The special design of shuripu plate can greatly improve the heat transfer efficiency.
Material Design and Selections
Material Selection | ||
Plate Material | SUS304, SUS316L, SMO254, Ti, Ni, Hastelloy |  |
| Gasket Material | NBR, HNBR, EPDM,Viton/Flurorubber,Chloroprene, Silicone Rubber |  |
| Frame Material | Carbon Steel, Stainless Steel |  |
| *For specific requirements, please contact us for confirmation | ||
Product Advantages
●Safety
●High heat transfer efficiency
●Small floor area
●Cost-effective
●Low fouling coefficient
●Convenient cleaning
Plate and Frame Heat Exchanger
Applications
Waste Heat Recovery
Food & Beverage
Petrochemical Industry
Mining Industry
Water Heating
Real Case Show 
For example, when the flow rate corresponding to the determined heat exchange area in the table is twice that of the flow rate used, the flow rate in the heat exchange runner can be doubled to reach the appropriate flow rate by adopting the dual-flow assembly form. The two flow channels can use different flow numbers according to different flow rates. As the number of processes increases, so does the resistance. For heat exchangers heated by steam, the steam side should generally be installed in the form of a single flow, in order to facilitate the full entry of steam and smooth discharge of condensed water.
Other Information
Please contact us
Contact: Ms.Luna
Email:luna@tranp.cn
With high quality Air Conditioning Air Handling Units Erv Hrv HVAC and perfect service, we would like to cooperate with every customer to make progress, develop together and create a wonderful future. We take the user as the core, from the good expectations and trust of users. Strict top quality management, fantastic service, reasonable cost is our stand on the premise of competition.