Relying on a good professional background and rich experience in the water to air heat exchanger with blower, Sondex plates&gaskets, ventilation heat exchanger industry, our company has cultivated a professional technical team and established a complete quality control system to ensure that the product quality is always at the international level. We continue to improve the production process, improve the quality of products, improve productivity, reduce the defective rate and so on. Our company closely around the strategic development plan of the company, adhere to the development as the main line.
Introduction of Air heat exchanger
Waste heat recovery heat exchanger, its working principle is that the cold and hot two fluids flow through the same heat exchange surface in turn, and try to avoid mixing with each other. When the hot fluid flows through, the heat exchange surface to absorb and accumulate heat released from the hot fluid; when the cold fluid flows through, the heat exchange surface and heat release to the cold fluid, through the heat exchange surface of this alternating heat absorption, heat release process to achieve cold, hot fluids ask the heat exchange.
In this type of heat exchanger, heat transfer surface periodically absorb and release heat, so this heat exchanger in the heat address transfer process is non-stationary. Such as power plant boilers in the rotary air preheater is this type.
The finned-tube air heat exchanger is designed with a set of parallel tubes arranged in a rectangular array. Each tube is equipped with a series of fins, which greatly increase the surface area available for heat transfer. The hot gas stream from the ammonia synthesis process flows through the inner tubes, while the cold air stream flows over the external fins. Heat is transferred from the hot gas stream to the cold air stream, raising the outlet temperature of the air and reducing the temperature of the hot gas stream.
Application
Most of the organic waste gas from the DC system of grain and oil companies is directly discharged after passing through Shakron.
The waste gas from the first and second stage Shakron is about 80-70°C, with high temperature, high humidity and high VOC content.
The exhaust gas from the third and fourth stage Shakron is about 50-60°C, with high temperature, low humidity, and low VOC content.
The exhaust of DC exhaust gas not only causes greater pollution to the environment, but also a great waste of energy.
These efforts include the availability of customized designs with speed and dispatch for Air to Air Heat Energy Recovery Plate Heat Exchanger. Corporate culture is the sum of values, management system, behavior norms and cultural activities of an enterprise. Optimistic attitude is our consistent style, and keeping gratitude reflects our responsibility and feelings.