We will do our best to maintain our reputation in terms of quality and reliability of the Heater, brewery heat exchanger, double pass heat exchanger, thus building a good corporate image. Good quality and aggressive prices make our products get pleasure from a significant name all around the word. We start from the actual operation, combined with the business sector, innovative stakeholder communication and interaction mode. We provide novel products that meet consumer needs at reasonable prices. The company vigorously promotes the enterprise spirit of pursuing quality excellence and enterprising unlimited, aiming to build a comprehensive supplier at the boundary level.
Introduction of Air heat exchanger
Waste heat recovery heat exchanger, its working principle is that the cold and hot two fluids flow through the same heat exchange surface in turn, and try to avoid mixing with each other. When the hot fluid flows through, the heat exchange surface to absorb and accumulate heat released from the hot fluid; when the cold fluid flows through, the heat exchange surface and heat release to the cold fluid, through the heat exchange surface of this alternating heat absorption, heat release process to achieve cold, hot fluids ask the heat exchange.
In this type of heat exchanger, heat transfer surface periodically absorb and release heat, so this heat exchanger in the heat address transfer process is non-stationary. Such as power plant boilers in the rotary air preheater is this type.
The finned-tube air heat exchanger is designed with a set of parallel tubes arranged in a rectangular array. Each tube is equipped with a series of fins, which greatly increase the surface area available for heat transfer. The hot gas stream from the ammonia synthesis process flows through the inner tubes, while the cold air stream flows over the external fins. Heat is transferred from the hot gas stream to the cold air stream, raising the outlet temperature of the air and reducing the temperature of the hot gas stream.
Application
Most of the organic waste gas from the DC system of grain and oil companies is directly discharged after passing through Shakron.
The waste gas from the first and second stage Shakron is about 80-70°C, with high temperature, high humidity and high VOC content.
The exhaust gas from the third and fourth stage Shakron is about 50-60°C, with high temperature, low humidity, and low VOC content.
The exhaust of DC exhaust gas not only causes greater pollution to the environment, but also a great waste of energy.
We continue to improve and innovate to produce high-quality and practical Air to Air Plate Heat Exchanger for Ahus, Hrus; Enthalpy, Latent Heat Recovery (HBT-W) that can be used in a variety of fields. Now our company has a full set of modern intelligent calibration equipment, which provides quality assurance for the company's products. In the process of economic globalization, only excellent enterprises can survive. Our company will make unremitting efforts to connect with the world.