We are committed to the professional design and manufacturing of combi boiler heat exchanger, steam exchanger, Fin tube/pipe, and have accumulated rich production experience and product resources. Through continuous efforts, our company enhances its competitiveness. We carry out regular training for each employee, which not only further improves the production efficiency, but also greatly improves the quality of products, laying a solid foundation of software and hardware for the future large-scale development of our company. The global difficulties we are facing now will ultimately greatly change our society and daily life, forcing us to greatly change our values.
Air to air heat exchanger is designed to realize function heat exchange by using different types of tube, made up of a set of leveled metal plate. Based on finned heat exchanger fin spacing structure improvements, cooling fan in dimension, the height, width and tube under the premise of constant total length, under frosting conditions runtime,it still can keep the higher heat transfer coefficient, and the variable fin spacing of the structure of the air cooler than fin spacing structure. Thus, cooling fan of the heat transfer coefficient will be increased by 9.8%, with heat transfer area of improvement, Heat transfer can be enhanced by increasing heat transfer coefficient and heat transfer area.
Product Specification
| Plate Material | SS304, SS316, Ti, Ni, Hastelloy |
| Dimension of Plate | Minimum unit 1200x800mm,1200x295mm |
| Space of Channel | 10mm |
| Applicable Temperature | Below 450'C or above 450'C |
| Frame Material | Stainless steel, carbon steel |
Case & Example
Soybeen Drying Project
The equipment selected for drying project used in XX Grain Company is 1200*2400 type plate heat exchanger with wide channel, and the groove depth is about 10.5mm. The air and gas heat exchanger is made by the hot air material along with the conveyor belt to move the space, the position between the soybean particles is relatively fixed. Besides, the drying time is basically the same, the air and gas heat exchanger is very suitable for drying materials with uniform color change or uniform wet content. Simple structure selected for the project and each unit section is including circulating fan, heating device, separate or public fresh air pumping system and exhaust exhaust system. And the number of drying medium, temperature, humidity and exhaust exhaust circulation and other operating parameters, can be controlled independently, so as to ensure the reliability of the work and the optimization of operating conditions.
With the concept of science and technology, innovation and development, we have always engaged in both research and production, aiming to be one of the most professional manufacturer of Auto Aluminum Radiator for Honda Odyssey OEM: 19010-Rfe-902. It is our company's unswerving purpose to revitalize the nation's high technology and benefit all humanity. We should cooperate with other companies to complement each other's advantages in order to strengthen our competitiveness together, and therefore adapt to the competitive environment of the contemporary market.