All of our shell and tube type heat exchanger, Tube And Shell Heat Exchanger, industrial plate heat exchanger are independently researched and acquired by our unique technology to make sure that they can be upgraded and updated constantly. Peace, development and cooperation have become trends of our times and represent the common aspirations of all countries and people in the world. We're confident that we are going to share mutual results and build solid co-operation relations with our companions in this market. The economic construction of our company has been fruitful, and our comprehensive strength and international influence have been increasing.
Air cooled heat exchanger, the fin tube heat exchanger spacing for this type, slice height is the main factors affecting the fin ratio, medium in the tube and outside the medium fin ratio and heat transfer coefficient will be significant. If there is a large difference in the heat transfer coefficient of the inner and outer film of the tube, the finned tube with a large finned ratio should be selected, such as steam heating air. When there is a single-sided medium phase change, the heat transfer coefficient is very different, such as the exchange of hot and cold air, when the hot air falls below the dew point, finned tube heat exchanger can be used.
Product Specification
| Fin Type | Rolling type, coiling type, plate-fin type, welding type |
| Tube Material | Steel tube, copper |
| Fin Material | Steel, aluminium |
Working Scheme
Bare tubes are usually suitable for heat transfer between air and air without phase change, or between water and water. When using low finned tube, due to the weak heat transfer coefficient during this period, strengthening it will produce a certain effect. However, the excessive fin effect is not obvious, and the contact area between tube and tube is strengthened at the same time. Threaded tube or grooved tube can be used.
Finned tube has super stability and low contact thermal resistance, can meet the requirements of industrial and mining enterprises and large buildings, but also has super heat dissipation and strong quality assurance ability.
Applications
air conditioning
space heating
petrochemical plants
refrigeration, power stations
chemical plants, waste treatment
petroleum refineries
Q & A
1. Q: What kind of equipment used for manufacturing process?
A: A series of high-tech equipment used in the process of manufacture, including special hydraulic machine for plate heat exchanger, CNC automatic cutting machine, automatic wheat arc welding machine, automatic plasma welding machine, CNC plate winding machine, shearing machine and etc.
2. Q: What are certificates and soft power used in manufacturing process?
A: Tranp has obtained ISO9001 certification, CE certification, standardized enterprise certification and various utility model patent certificates, with professional engineering and technical personnel engaged in the design of heat exchange equipment, thermal system and environmental recovery system. We will help customers to qualify CE certificates or other foreign certificates in different area all over the word.
3 .Q: What material and standards used for products?
A: All the products are manufactured as per national standards,including TSG21-2016, NB/T47004-2009, GB150.1-4-2011, GB/T151,2014, GB/T14296-2008 and etc.
For more information, feel free to contact us !
Contact: Rebecca
Email: rebecca@Tranp.cn
Wechat: +86 18656080791
We uphold the attitude of integrity, sincerity and responsibility, optimize the product structure, and provide agents and consumers with more high-quality, reliable and cost-effective Cooling Heating Fin Tube Heat Exchanger or Radiator Fan for Cultivation and Graziery. We are determined to become the integrator of our product market and one-stop service provider of our product market. We are committed to cooperating with all parties in the industrial chain in a sincere and open spirit to promote the rapid development of the industry.