We have set up the company's quality inspection department to improve the quality of our Heat Exchanger Plate&gasket, water to water heat exchanger, High Frequency Welding Finned Tube, so as to make our products more competitive in the industry circle. By 10 years effort, we attract customers by competitive price and excellent service. We are committed to the principles of honest, people-centric service, and technological innovation and sustainable development. We create our own competitiveness through technological innovation. For this purpose, we have been working hard to exceed all possible limits and never stop. Our company vigorously carries out the construction of corporate culture to create a happy working environment for employees.
Packaged plate heat exchanger
The material, quantity, size and arrangement of the plate depend on the operating condition. The gasket is located in the gasket groove around the plate. Around the opening, the gasket is a double ring shape, which can prevent the two media from leaking to each other. When the gasket is damaged, the medium is directly drained out of the heat exchanger.
After the plate heat exchanger is clamped, because of the sealing and isolation of the gasket, through the channel hole of the plate, two different media can be in two alternate channels, reverse flow, exchange heat with each other. The special design of shuripu plate can greatly improve the heat transfer efficiency.
Material Design and Selections
Material Selection | ||
Plate Material | SUS304, SUS316L, SMO254, Ti, Ni, Hastelloy |  |
| Gasket Material | NBR, HNBR, EPDM,Viton/Flurorubber,Chloroprene, Silicone Rubber |  |
| Frame Material | Carbon Steel, Stainless Steel |  |
| *For specific requirements, please contact us for confirmation | ||
Product Advantages
●Safety
●High heat transfer efficiency
●Small floor area
●Cost-effective
●Low fouling coefficient
●Convenient cleaning
Plate and Frame Heat Exchanger
Applications
Waste Heat Recovery
Food & Beverage
Petrochemical Industry
Mining Industry
Water Heating
Real Case Show 
For example, when the flow rate corresponding to the determined heat exchange area in the table is twice that of the flow rate used, the flow rate in the heat exchange runner can be doubled to reach the appropriate flow rate by adopting the dual-flow assembly form. The two flow channels can use different flow numbers according to different flow rates. As the number of processes increases, so does the resistance. For heat exchangers heated by steam, the steam side should generally be installed in the form of a single flow, in order to facilitate the full entry of steam and smooth discharge of condensed water.
Other Information
Please contact us
Contact: Ms.Luna
Email:luna@tranp.cn
We take honest management, technological innovation, and self-transcendence as our business philosophy to meet market demand for Copper Brazed Plate B3-110 Heat Exchanger for Cold Room. We understand that the essence of business lies in user experience and we are committed to integrating humanized products, humanized services and business philosophy close to the new era of Internet. We are recruiting talents in continuous development and change, and sincerely hope to encourage each employee to develop themselves.