We will make wonderful endeavours to build new and top-quality merchandise, satisfy your exclusive needs and provide you with pre-sale, on-sale and after-sale products and services for outdoor boiler heat exchanger, Reactor Mixing Tank, Water Chiller. Our staffs are rich in experience and trained strictly, with professional knowledge, with energy and always respect their customers as the No. 'Quality oriented, mutual benefit and win-win' is our marketing policy. We are willing to sincerely cooperate with friends from all walks of life on the basis of enhancing understanding and mutual trust, so as to jointly open a bright future for career success!
Packaged plate heat exchanger
The material, quantity, size and arrangement of the plate depend on the operating condition. The gasket is located in the gasket groove around the plate. Around the opening, the gasket is a double ring shape, which can prevent the two media from leaking to each other. When the gasket is damaged, the medium is directly drained out of the heat exchanger.
After the plate heat exchanger is clamped, because of the sealing and isolation of the gasket, through the channel hole of the plate, two different media can be in two alternate channels, reverse flow, exchange heat with each other. The special design of shuripu plate can greatly improve the heat transfer efficiency.
Material Design and Selections
Material Selection | ||
Plate Material | SUS304, SUS316L, SMO254, Ti, Ni, Hastelloy |  |
| Gasket Material | NBR, HNBR, EPDM,Viton/Flurorubber,Chloroprene, Silicone Rubber |  |
| Frame Material | Carbon Steel, Stainless Steel |  |
| *For specific requirements, please contact us for confirmation | ||
Product Advantages
●Safety
●High heat transfer efficiency
●Small floor area
●Cost-effective
●Low fouling coefficient
●Convenient cleaning
Plate and Frame Heat Exchanger
Applications
Waste Heat Recovery
Food & Beverage
Petrochemical Industry
Mining Industry
Water Heating
Real Case Show 
For example, when the flow rate corresponding to the determined heat exchange area in the table is twice that of the flow rate used, the flow rate in the heat exchange runner can be doubled to reach the appropriate flow rate by adopting the dual-flow assembly form. The two flow channels can use different flow numbers according to different flow rates. As the number of processes increases, so does the resistance. For heat exchangers heated by steam, the steam side should generally be installed in the form of a single flow, in order to facilitate the full entry of steam and smooth discharge of condensed water.
Other Information
Please contact us
Contact: Ms.Luna
Email:luna@tranp.cn
The excellent performance of our Copper Foam, 460mm X 380mm, Heat Exchanger and high-level design capabilities of our team show our obvious advantages over competitors. We always adhere to the tenet of 'today's quality, tomorrow's market', constantly meet the needs of the society and actively explore the international market. Our company adheres to the business philosophy of 'Pioneering, Enterprising, High-quality and High-efficiency', and provides customers with all-round support.