We now have many fantastic staff members customers superior at advertising, QC, and working with varieties of troublesome problem within the generation system for welded plate, heat recovery air exchanger, Closed Type Cooling Tower. We are committed to creating a vibrant and harmonious working environment, focusing on the education, training and growth of personnel in both morality and talent. We build friendships and become friends through communication and exchange with our customers. We always focus on the practicality and safety of the product.
Packaged plate heat exchanger
The material, quantity, size and arrangement of the plate depend on the operating condition. The gasket is located in the gasket groove around the plate. Around the opening, the gasket is a double ring shape, which can prevent the two media from leaking to each other. When the gasket is damaged, the medium is directly drained out of the heat exchanger.
After the plate heat exchanger is clamped, because of the sealing and isolation of the gasket, through the channel hole of the plate, two different media can be in two alternate channels, reverse flow, exchange heat with each other. The special design of shuripu plate can greatly improve the heat transfer efficiency.
Material Design and Selections
Material Selection | ||
Plate Material | SUS304, SUS316L, SMO254, Ti, Ni, Hastelloy |  |
| Gasket Material | NBR, HNBR, EPDM,Viton/Flurorubber,Chloroprene, Silicone Rubber |  |
| Frame Material | Carbon Steel, Stainless Steel |  |
| *For specific requirements, please contact us for confirmation | ||
Product Advantages
●Safety
●High heat transfer efficiency
●Small floor area
●Cost-effective
●Low fouling coefficient
●Convenient cleaning
Plate and Frame Heat Exchanger
Applications
Waste Heat Recovery
Food & Beverage
Petrochemical Industry
Mining Industry
Water Heating
Real Case Show 
For example, when the flow rate corresponding to the determined heat exchange area in the table is twice that of the flow rate used, the flow rate in the heat exchange runner can be doubled to reach the appropriate flow rate by adopting the dual-flow assembly form. The two flow channels can use different flow numbers according to different flow rates. As the number of processes increases, so does the resistance. For heat exchangers heated by steam, the steam side should generally be installed in the form of a single flow, in order to facilitate the full entry of steam and smooth discharge of condensed water.
Other Information
Please contact us
Contact: Ms.Luna
Email:luna@tranp.cn
With strong research and development capabilities, we strive to develop a variety of new and practical Eurovent & CE Certificated Rotary Heat Exchanger (HRT500-5000) and continue to provide users with better application solutions. We continue to build an excellent corporate culture through teamwork, division of responsibilities, mutual trust, communication and honest management, and strive to become the best enterprise. We use the concept of social responsibility to sort out the mission, vision and values of the enterprise, and examine the development strategy, business model and business process of the enterprise.