Customers recognize the consistent outstanding quality of our company's universal exchanger, Cooper tube condenser cooling coil, Tranter plates&gaskets and always tend to buy our products. The products and technical services provided by our company reflect the standardized and advanced professional level. Adhering to the enterprise spirit of 'integrity, unity, pragmatism and innovation', we cooperate with domestic and foreign merchants to achieve mutual benefit and common prosperity. We hope that all our staff can deeply understand the connotation of corporate culture, strive to do better, be honest and do things steadfastly.
Packaged plate heat exchanger
The material, quantity, size and arrangement of the plate depend on the operating condition. The gasket is located in the gasket groove around the plate. Around the opening, the gasket is a double ring shape, which can prevent the two media from leaking to each other. When the gasket is damaged, the medium is directly drained out of the heat exchanger.
After the plate heat exchanger is clamped, because of the sealing and isolation of the gasket, through the channel hole of the plate, two different media can be in two alternate channels, reverse flow, exchange heat with each other. The special design of shuripu plate can greatly improve the heat transfer efficiency.
Material Design and Selections
Material Selection | ||
Plate Material | SUS304, SUS316L, SMO254, Ti, Ni, Hastelloy |  |
| Gasket Material | NBR, HNBR, EPDM,Viton/Flurorubber,Chloroprene, Silicone Rubber |  |
| Frame Material | Carbon Steel, Stainless Steel |  |
| *For specific requirements, please contact us for confirmation | ||
Product Advantages
●Safety
●High heat transfer efficiency
●Small floor area
●Cost-effective
●Low fouling coefficient
●Convenient cleaning
Plate and Frame Heat Exchanger
Applications
Waste Heat Recovery
Food & Beverage
Petrochemical Industry
Mining Industry
Water Heating
Real Case Show 
For example, when the flow rate corresponding to the determined heat exchange area in the table is twice that of the flow rate used, the flow rate in the heat exchange runner can be doubled to reach the appropriate flow rate by adopting the dual-flow assembly form. The two flow channels can use different flow numbers according to different flow rates. As the number of processes increases, so does the resistance. For heat exchangers heated by steam, the steam side should generally be installed in the form of a single flow, in order to facilitate the full entry of steam and smooth discharge of condensed water.
Other Information
Please contact us
Contact: Ms.Luna
Email:luna@tranp.cn
We design and manufacture each Factory Price Commercial HVAC System Multifunction Fresh Air Handling Unit with excellent manufacturing equipment, highly qualified engineers and technicians to ensure the best performance. We insist on deepening reform, paying more attention to improving the quality, efficiency, independent innovation and core competitiveness. Our goal is to meet the growing needs of our customers with excellent products, reliable quality, superior lifetime performance-cost ratio and effective service.