We rely on advanced production equipment, perfect quality management system and scientific and standardized production process, committed to providing customers with multi-level, high-quality integrated solutions for the heat exchange, Pipe Heat Exchanger, semi welded plate heat exchanger. At present, our company has a group of highly qualified technical personnel and sales team. Our company adopts modern and advanced sophisticated management methods and strictly implements the quality management system, which greatly reduces production costs.
Packaged plate heat exchanger
The material, quantity, size and arrangement of the plate depend on the operating condition. The gasket is located in the gasket groove around the plate. Around the opening, the gasket is a double ring shape, which can prevent the two media from leaking to each other. When the gasket is damaged, the medium is directly drained out of the heat exchanger.
After the plate heat exchanger is clamped, because of the sealing and isolation of the gasket, through the channel hole of the plate, two different media can be in two alternate channels, reverse flow, exchange heat with each other. The special design of shuripu plate can greatly improve the heat transfer efficiency.
Material Design and Selections
Material Selection | ||
Plate Material | SUS304, SUS316L, SMO254, Ti, Ni, Hastelloy |  |
| Gasket Material | NBR, HNBR, EPDM,Viton/Flurorubber,Chloroprene, Silicone Rubber |  |
| Frame Material | Carbon Steel, Stainless Steel |  |
| *For specific requirements, please contact us for confirmation | ||
Product Advantages
●Safety
●High heat transfer efficiency
●Small floor area
●Cost-effective
●Low fouling coefficient
●Convenient cleaning
Plate and Frame Heat Exchanger
Applications
Waste Heat Recovery
Food & Beverage
Petrochemical Industry
Mining Industry
Water Heating
Real Case Show 
For example, when the flow rate corresponding to the determined heat exchange area in the table is twice that of the flow rate used, the flow rate in the heat exchange runner can be doubled to reach the appropriate flow rate by adopting the dual-flow assembly form. The two flow channels can use different flow numbers according to different flow rates. As the number of processes increases, so does the resistance. For heat exchangers heated by steam, the steam side should generally be installed in the form of a single flow, in order to facilitate the full entry of steam and smooth discharge of condensed water.
Other Information
Please contact us
Contact: Ms.Luna
Email:luna@tranp.cn
Our company always adheres to the corporate tenet of 'good quality and honesty' and adopts scientific management mode. With advanced production technology and good after-sales service, we are committed to becoming a trusted supplier of Heat Recovery Wheel, Air to Air Rotary Heat Exchanger, Ahu Heat Recovery Section (HRT-500~5000) worldwide. Based on the philosophy of pragmatism, innovation, refinement and progress, we continue to carry out technological innovation and pursue quality, and always strive to provide our customers with high-quality and high-performance products. We continue to absorb and digest the advanced technology at home and abroad.