Extraordinary design and perfect craft creation make our heat exchanger hot water heater, Air Cooled Heat Exchanger, Replacement plate always in the leading position. While meeting domestic market demand, the company is actively developing international markets. When we realize that some of our prices are higher than those of our competitors, we adjust our prices accordingly. We stick to the principle of 'customer first, quality first'. With our continuous efforts of technology innovation, we pursue excellent quality, establish and improve the strict quality standard inspection system, and finally bring sincere return to customers to achieve a win-win situation.
Introduction of Air heat exchanger
Waste heat recovery heat exchanger, its working principle is that the cold and hot two fluids flow through the same heat exchange surface in turn, and try to avoid mixing with each other. When the hot fluid flows through, the heat exchange surface to absorb and accumulate heat released from the hot fluid; when the cold fluid flows through, the heat exchange surface and heat release to the cold fluid, through the heat exchange surface of this alternating heat absorption, heat release process to achieve cold, hot fluids ask the heat exchange.
In this type of heat exchanger, heat transfer surface periodically absorb and release heat, so this heat exchanger in the heat address transfer process is non-stationary. Such as power plant boilers in the rotary air preheater is this type.
The finned-tube air heat exchanger is designed with a set of parallel tubes arranged in a rectangular array. Each tube is equipped with a series of fins, which greatly increase the surface area available for heat transfer. The hot gas stream from the ammonia synthesis process flows through the inner tubes, while the cold air stream flows over the external fins. Heat is transferred from the hot gas stream to the cold air stream, raising the outlet temperature of the air and reducing the temperature of the hot gas stream.
Application
Most of the organic waste gas from the DC system of grain and oil companies is directly discharged after passing through Shakron.
The waste gas from the first and second stage Shakron is about 80-70°C, with high temperature, high humidity and high VOC content.
The exhaust gas from the third and fourth stage Shakron is about 50-60°C, with high temperature, low humidity, and low VOC content.
The exhaust of DC exhaust gas not only causes greater pollution to the environment, but also a great waste of energy.
We are a professional High Performance Jxz14 Hydraulic Oil Cooler Brazed Plate Heat Exchanger for Liquid Heat Transferhigh Performance manufacturer integrating development, design, production and sales, and our products reflect the characteristics of the times. Through the construction of learning enterprises, we advocate the common growth of employees and our company. We always pay attention to the market and customer demand changes, enhance the company's sensitive and rapid response.