We are experienced in producing and operating the fin fan heat exchanger, Industrial PVC Fill, Alunimum Finned Type Cooling Coil and are familiar with the needs of customers. With a thousand years of tradition, the excellent Chinese culture of taking morality as the foundation, credit as the first, righteousness as the benefit has had a significant and far-reaching impact on our business operation and management. Our company will put excellent products on the market and sincerely cooperate with new and old customers with honest service.
Thermal Heat Exchanger
Product Introduction
Thermal heat exchanger is a type of heat exchanger for heat transfer of two mediums with different temperature. It is suitable for two kinds of fluids and works best when two mediums are water (The terminal temperature difference can reach 1℃). Plate and frame heat exchanger is available in a large area of industries, from dairy industry to petrochemical industry, it's very common to see this equipment.
Material Design and Selections
For various applications and requirements, we provide many types of material.
Material Selection | ||
Plate Material | SUS304, SUS316L, SMO254, Ti, Ni, Hastelloy |  |
| Gasket Material | NBR, HNBR, EPDM,Viton/Flurorubber,Chloroprene, Silicone Rubber |  |
| Frame Material | Carbon Steel, Stainless Steel |  |
| *For specific requirements, please contact us for confirmation | ||
Product Advantages
●Safety
●High heat transfer efficiency
●Small floor area
●Low fouling coefficient
●Convenient cleaning
What tests need to be completed before the HE leaves the factory?
The hydrostatic test should be done for the plate heat exchanger before use.
Steps:
1、Check whether the clamping size meets the nameplate requirements.
2、Prepare the blind plate and test pressure device, the pressure gauge can be installed on the test pressure device.
3、The air in the equipment should be fully discharged
4、According to the design pressure 1.25 times (or the nameplate given by the hydraulic test pressure) for a single side test pressure to determine whether there is leakage to the empty side of the plate heat exchanger. Hold pressure for 30 minutes without leakage for qualified.
5、The blind plate should be removed after the test.
mail: sales02@tranp.cn
whatsapp/phone: +86 18776369372
address: No.3 Waizi Factory, Xindun Village, Xintang Town, Zengcheng District, Guangzhou City, Guangdong Province, China
Our commission should be to provide our end users and clients with very best excellent and aggressive portable digital products and solutions for High Pressure Chevron Angle Marine Ares Plate Heat Exchanger. If it's convenient, you could find out our address in our web site and come to our enterprise. Our products meet international quality standards and are extremely cost-effective.