Being supported by an advanced and professional IT team, we could offer technical support on pre-sales & after-sales service for Rolling Type Finned Tube, stainless heat exchanger, hot air heat exchanger. We have automatic production equipment with strong technical force and production capacity. We've been glad that we have been steadily escalating using the energetic and long lasting assist of our pleased shoppers!
Introduction of floating heat heat exchanger
One end of the tube plate at both ends of the floating head heat exchanger is not connected with the shell. The end is called the floating head.When the pipe is heated, the tube bundle together with the floating head can be freely telescopic along the axial direction, completely eliminating the temperature difference stress.
One end of the floating head heat exchanger tube plate and the shell is fixed, and the other end of the tube plate can float freely in the shell, shell and tube bundle is free to expand, so when the temperature difference between the two media is large, there is no temperature stress between the tube bundle and the shell.The floating head end is designed with a detachable structure so that the tube bundle can be easily inserted or extracted from the housing.(can also be designed to be non-detachable).This provides convenience for maintenance and cleaning.But the structure of the heat exchanger is more complex, and the small cap at the floating end can not know the leakage situation during operation.Therefore, special attention should be paid to its sealing during installation.
Advantage:
(1) The tube bundle can be drawn out to facilitate cleaning of the tube and shell side;
(2) The temperature difference between the media is not restricted;
(3) It can work under high temperature and high pressure, generally the temperature is less than or equal to 450 degrees, and the pressure is less than or equal to 6.4 MPa;
(4) It can be used in occasions with serious scaling;
(5) It can be used in the corrosion-prone occasions of the tube side.
Limitation:
(1) The small floating head is prone to internal leakage;
(2) The consumption of metal materials is large, and the cost is 20% higher;
(3) Complex structure
Application:
Chemical, petroleum, power industrial
We have never stopped on the road of pursuing excellent product quality of the Q030d/Q030e/Q055D/Q055e/Q080e Plate Heat Exchanger for Oil Industrial and technological innovation. We continue to enhance the brand's own value, making our brand benefit more and more obvious. We always adhere to the development strategy of integrating production and research, and take product innovation as our responsibility.