Adhering to the concept of green environmental protection, we put energy conservation and emission reduction throughout all aspects of the production of plate heat exchanger boiler, Funke plates&gaskets, brewery heat exchanger. Our company provides better service for consumers to fully meet their personalized needs, so as to improve the market share and enhance the competitive advantage of enterprises. Through the combination of traditional channels and Internet channels, we have formed a complete marketing context, which makes the way of trade more abundant. The rapid development of the economy makes the market put forward higher and greater challenges to the industry. Our company is based on the needs of this industry, takes the direction of high-end industrial development, implements the large and refined brand development strategy and is a dedicated and professional industry leader.
Packaged plate heat exchanger
The material, quantity, size and arrangement of the plate depend on the operating condition. The gasket is located in the gasket groove around the plate. Around the opening, the gasket is a double ring shape, which can prevent the two media from leaking to each other. When the gasket is damaged, the medium is directly drained out of the heat exchanger.
After the plate heat exchanger is clamped, because of the sealing and isolation of the gasket, through the channel hole of the plate, two different media can be in two alternate channels, reverse flow, exchange heat with each other. The special design of shuripu plate can greatly improve the heat transfer efficiency.
Material Design and Selections
Material Selection | ||
Plate Material | SUS304, SUS316L, SMO254, Ti, Ni, Hastelloy |  |
| Gasket Material | NBR, HNBR, EPDM,Viton/Flurorubber,Chloroprene, Silicone Rubber |  |
| Frame Material | Carbon Steel, Stainless Steel |  |
| *For specific requirements, please contact us for confirmation | ||
Product Advantages
●Safety
●High heat transfer efficiency
●Small floor area
●Cost-effective
●Low fouling coefficient
●Convenient cleaning
Plate and Frame Heat Exchanger
Applications
Waste Heat Recovery
Food & Beverage
Petrochemical Industry
Mining Industry
Water Heating
Real Case Show 
For example, when the flow rate corresponding to the determined heat exchange area in the table is twice that of the flow rate used, the flow rate in the heat exchange runner can be doubled to reach the appropriate flow rate by adopting the dual-flow assembly form. The two flow channels can use different flow numbers according to different flow rates. As the number of processes increases, so does the resistance. For heat exchangers heated by steam, the steam side should generally be installed in the form of a single flow, in order to facilitate the full entry of steam and smooth discharge of condensed water.
Other Information
Please contact us
Contact: Ms.Luna
Email:luna@tranp.cn
With advanced technology, high quality and stable products, perfect and meticulous service, we wholeheartedly manufacture Rooftop Air Conditioner Central HVAC Commercial Air Cooled that satisfy consumers. Our company focuses on continuous exploration, learning and growth. Welcome customers all over the world to contact us or visit our company.