In recent years, the application field of Intelligent Plate Heat Exchanger Unit, air cooled exchanger, the heat exchange has been continuously expanded and the demand for the development of various new series has continued to rise. We build our foundation with good faith, regard quality as life, and strive for in-depth cooperation with customers for common development. Within these four years we sell not only our products but also our service to clients throughout the world. We are willing to work hard, use wisdom and sweat to create better products, and sincerely cooperate with friends from all walks of life on the basis of sincere trust and mutual benefit for common development. In the context of industrial production, we need to innovate in the design methods of mass products to meet the individual needs of customers.
Packaged plate heat exchanger
The material, quantity, size and arrangement of the plate depend on the operating condition. The gasket is located in the gasket groove around the plate. Around the opening, the gasket is a double ring shape, which can prevent the two media from leaking to each other. When the gasket is damaged, the medium is directly drained out of the heat exchanger.
After the plate heat exchanger is clamped, because of the sealing and isolation of the gasket, through the channel hole of the plate, two different media can be in two alternate channels, reverse flow, exchange heat with each other. The special design of shuripu plate can greatly improve the heat transfer efficiency.
Material Design and Selections
Material Selection | ||
Plate Material | SUS304, SUS316L, SMO254, Ti, Ni, Hastelloy |  |
| Gasket Material | NBR, HNBR, EPDM,Viton/Flurorubber,Chloroprene, Silicone Rubber |  |
| Frame Material | Carbon Steel, Stainless Steel |  |
| *For specific requirements, please contact us for confirmation | ||
Product Advantages
●Safety
●High heat transfer efficiency
●Small floor area
●Cost-effective
●Low fouling coefficient
●Convenient cleaning
Plate and Frame Heat Exchanger
Applications
Waste Heat Recovery
Food & Beverage
Petrochemical Industry
Mining Industry
Water Heating
Real Case Show 
For example, when the flow rate corresponding to the determined heat exchange area in the table is twice that of the flow rate used, the flow rate in the heat exchange runner can be doubled to reach the appropriate flow rate by adopting the dual-flow assembly form. The two flow channels can use different flow numbers according to different flow rates. As the number of processes increases, so does the resistance. For heat exchangers heated by steam, the steam side should generally be installed in the form of a single flow, in order to facilitate the full entry of steam and smooth discharge of condensed water.
Other Information
Please contact us
Contact: Ms.Luna
Email:luna@tranp.cn
Our company will rely on equipment innovation and technological progress to continuously improve the technical quality of employees to ensure that enterprises provide customers with better Shanghai Shenglin R134A Roof Air Conditioning Packaged Rooftop Unit HVAC. At present, our conpany strides into the foreign market with flexible sales methods, standardized management systems and brand-new enterprise appearance. We warmly welcome you to create a prosperous future together. We have provided a reliable guarantee for the pursuit of "zero defect" production.