The customer-oriented concept and win-win strategy has become a driving force for our company. Backed by years of experience in the industry of Countercurrent Cooling Tower, Plate And Frame Heat Exchanger, spiral exchanger, we are confident to be to assist you with all your needs. We will work hand in hand with new and old customers based on the principle of honest service to create brilliance in the face of opportunities and challenges and make new contributions to the construction and development of the industry under the environment of active global economy. We pursue scientific and technological innovation, and maintain close cooperation with universities and research institutions. We have the ability of product development and customization, modern standard production line to ensure quality and delivery management.
Packaged plate heat exchanger
The material, quantity, size and arrangement of the plate depend on the operating condition. The gasket is located in the gasket groove around the plate. Around the opening, the gasket is a double ring shape, which can prevent the two media from leaking to each other. When the gasket is damaged, the medium is directly drained out of the heat exchanger.
After the plate heat exchanger is clamped, because of the sealing and isolation of the gasket, through the channel hole of the plate, two different media can be in two alternate channels, reverse flow, exchange heat with each other. The special design of shuripu plate can greatly improve the heat transfer efficiency.
Material Design and Selections
Material Selection | ||
Plate Material | SUS304, SUS316L, SMO254, Ti, Ni, Hastelloy |  |
| Gasket Material | NBR, HNBR, EPDM,Viton/Flurorubber,Chloroprene, Silicone Rubber |  |
| Frame Material | Carbon Steel, Stainless Steel |  |
| *For specific requirements, please contact us for confirmation | ||
Product Advantages
●Safety
●High heat transfer efficiency
●Small floor area
●Cost-effective
●Low fouling coefficient
●Convenient cleaning
Plate and Frame Heat Exchanger
Applications
Waste Heat Recovery
Food & Beverage
Petrochemical Industry
Mining Industry
Water Heating
Real Case Show 
For example, when the flow rate corresponding to the determined heat exchange area in the table is twice that of the flow rate used, the flow rate in the heat exchange runner can be doubled to reach the appropriate flow rate by adopting the dual-flow assembly form. The two flow channels can use different flow numbers according to different flow rates. As the number of processes increases, so does the resistance. For heat exchangers heated by steam, the steam side should generally be installed in the form of a single flow, in order to facilitate the full entry of steam and smooth discharge of condensed water.
Other Information
Please contact us
Contact: Ms.Luna
Email:luna@tranp.cn
Maintaining stable quality and manufacturing process makes our Titanium Pipe Shell and Tube Heat Exchanger trusted by customers for a long time. Our tenet is 'Reasonable prices, efficient production time and best service' We hope to cooperate with more customers for mutual development and benefits. 'Perfect the mechanism, strengthen the management, increase the efficiency' is my company's overall management policy. Our company provides customers with better products and services with a scientific attitude and a responsible spirit. Welcome to visit us.