In the process of development, our company continuously learns advanced technology experience at home and abroad, which has continuously improved our development capabilities in the field of air to water intercooler heat exchanger, air exchanger home depot, welded plate heat exchanger. Whether it is between internal employees, or external customers and suppliers, we uphold the concept of "mutual trust, sincerity", no exaggeration, no mutual suspicion, no deceit. The pursuit of knowledge and excellence is the driving force behind the success and growth of our company. Technology is constantly innovating. Only through continuous learning and innovation can we achieve greater benefits for the company.
Thermal Heat Exchanger
Product Introduction
Thermal heat exchanger is a type of heat exchanger for heat transfer of two mediums with different temperature. It is suitable for two kinds of fluids and works best when two mediums are water (The terminal temperature difference can reach 1℃). Plate and frame heat exchanger is available in a large area of industries, from dairy industry to petrochemical industry, it's very common to see this equipment.
Material Design and Selections
For various applications and requirements, we provide many types of material.
Material Selection | ||
Plate Material | SUS304, SUS316L, SMO254, Ti, Ni, Hastelloy |  |
| Gasket Material | NBR, HNBR, EPDM,Viton/Flurorubber,Chloroprene, Silicone Rubber |  |
| Frame Material | Carbon Steel, Stainless Steel |  |
| *For specific requirements, please contact us for confirmation | ||
Product Advantages
●Safety
●High heat transfer efficiency
●Small floor area
●Low fouling coefficient
●Convenient cleaning
What tests need to be completed before the HE leaves the factory?
The hydrostatic test should be done for the plate heat exchanger before use.
Steps:
1、Check whether the clamping size meets the nameplate requirements.
2、Prepare the blind plate and test pressure device, the pressure gauge can be installed on the test pressure device.
3、The air in the equipment should be fully discharged
4、According to the design pressure 1.25 times (or the nameplate given by the hydraulic test pressure) for a single side test pressure to determine whether there is leakage to the empty side of the plate heat exchanger. Hold pressure for 30 minutes without leakage for qualified.
5、The blind plate should be removed after the test.
mail: sales02@tranp.cn
whatsapp/phone: +86 18776369372
address: No.3 Waizi Factory, Xindun Village, Xintang Town, Zengcheng District, Guangzhou City, Guangdong Province, China
Creating a first-class enterprise and producing first-class Zt030 Coolsour Corrugated Tube Coaxial Heat Exchanger, our company is forging ahead in the fierce market competition. We actively implement the new development concept, promote high-quality development, and strive to make our company a world-class company with international competitiveness! As always, we will strictly abide by the corporate tenet, be honest and respect customers, and sincerely look forward to cooperating with customers at home and abroad.