Products
Counterflow Cooling Tower For Injection Molding System

Counterflow Cooling Tower For Injection Molding System

What is the Counterflow Colsed Type Cooling Tower? Counterflow closed cooling tower is a device that uses the contact between air and water (directly or indirectly) to cool water. It is a device that uses water as a circulating coolant, absorbs heat from a system and discharges it to the...

What is the Counterflow Colsed Type Cooling Tower?

 

Counterflow closed cooling tower is a device that uses the contact between air and water (directly or indirectly) to cool water. It is a device that uses water as a circulating coolant, absorbs heat from a system and discharges it to the atmosphere, thereby reducing the temperature inside the tower and creating cooling water that can be recycled.

Cooling Tower1

What are the Advantages?

 

1, Stable: closed cooling tower circulating water usually uses soft water closed circuit circulation, effectively prevent damage to equipment caused by scale generated in the tower or user equipment in the long-term use process.

 

2, Water saving: because of the use of fully closed internal circulation, and the use of efficient dewatering device, so more suitable for use in areas where water resources are scarce.

 

3, Energy saving: closed cooling tower can be based on the temperature to control the number of fans to start, and spray pump open and close, can also be installed to adjust the valve to control the flow.

 

4, Environmental protection: closed cooling tower through the fully enclosed inner circuit circulation water is not polluted, can be used continuously.

 

5, Longer service life: high-quality metal materials and lower costs.

 

Whare can we use the cooling tower?

 

A plastics company uses an injection molding machine cooling tower system to keep the water at 37°C to 32°C. The water cools the machines in the plant to prevent the maximum oil temperature from being exceeded and to reduce the temperature in the feed throat. The plastic is fed through the feed throat into a heated drum. The process requires the feed throat to be cooled enough to prevent premature melting of the plastic as it enters the mold.

 

Hot Tags: counterflow cooling tower for injection molding system, China counterflow cooling tower for injection molding system manufacturers, suppliers, factory, Square Shape Cooling Tower, Motor free Cooling Tower, Cooling Tower Filler, Round Shape Cooling Tower, Closed Type Cooling Tower, Countercurrent Cooling Tower

Send Inquiry