Air cooler
The correct position of the inlet for both liquids in this type of air to oil cooler. They should cycle in opposite directions for maximum heat exchange. The positioning of the heat exchanger on the machine shall be carried out using appropriate flexible supports, and all related to hydraulic or power units shall be carried out through flexible pipes. To protect the heat exchanger, it is best to insert a bypass valve. At very low temperatures, it is best to keep the water cost circulating to prevent harmful breaks, or to empty the exchanger by using a drain valve.
Applicable fluid
Mineral oil; HL; HLP.
Water/oil mixture
Water - Grenic acid
Water/industrial water
For other liquids
Maintenance
Clean water side
To ensure the maximum effect of the exchange, it is recommended that the waterways be inspected to remove all traces of lime or any other impurities that may have been deposited in the pipes. This operation can be easily accomplished by removing the head and flushing the line.
Cleaning oil side
In this part of the circuit, cleaning will be carried out by a cycle of tetrachloride opposite to the normal flow direction for approximately 30 minutes. This will help remove any residue left by rinsing with hot water.
For more information, feel free to contact us !
Contact: Ms.Rebecca
Email: rebecca@tranp.cn
Hot Tags: air to oil cooler heat exchanger, China air to oil cooler heat exchanger manufacturers, suppliers, factory, air fin heat exchanger, Finned Tube Air Heat Exchanger, fin fan, flue gas heat exchanger, Tubular Air Heat Exchanger, air recuperator