Cold and heat source equipment
Providing Cold/Hot Water Or Refrigerant
Heat pump units
- Air source heat pumps : no cooling water required, suitable for mild climate areas.
- Ground source heat pumps: using soil/groundwater heat exchange, good energy saving, high initial investment.
Water chillers
- Centrifugal: suitable for large loads above 1000RT, such as shopping malls.
- Screw: 300-1000RT, such as office buildings.
- Scroll: 10-300RT, such as small businesses.
Heating equipment
- Gas boilers: providing hot water/steam.
- Electric boilers: suitable for areas with low electricity prices.
- Air source heat pumps : winter heating.
Air handling equipment (adjusting air temperature, humidity and cleanliness)
Air handling unit (AHU)
Centralized processing of fresh air + return air, including filtering, heating, cooling, humidification and dehumidification functions, suitable for centralized systems.
Fan coil unit (FCU)
Decentralized processing of indoor air, used in conjunction with the fresh air system.
Preservoir air unit (PAU)
Specializes in processing fresh air to ensure that the fresh air delivered to the room meets the standards.
Terminal air outlet
Diffuser, louver air outlet, swirl air outlet.
Water system equipment
Transporting cold/hot water
qualified
请替换当前内容 We always use natural wood and log as materials, without any splicing or chemical processing, which is natural, environment-friendly and of good quality. Give your home the best touch and atmosphere
environment-friendly
We always use natural wood and log as materials, without any splicing or chemical processing, which is natural, environment-friendly and of good quality. Give your home the best touch and atmosphere
Wind system equipment & control equipment
Wind System
- Air duct: galvanized steel plate air duct, composite air duct, stainless steel air duct.
- Fan: centrifugal fan, axial flow fan, mixed flow fan.
- Air valve: electric regulating valve, fire damper, check valve.
- Filter: primary filter, medium efficiency filter, high efficiency filter.
Control Equipment
- Sensors (temperature, humidity, pressure, CO₂ sensors, feedback environmental parameters).
- Controller (DDC/PLC, system core, execution regulation logic).
- Actuator (electric two-way valve, air valve actuator, receiving control signal action).
- Frequency converter (adjusting water pump/fan speed, energy saving 30%-50%).