Regular maintenance must be done after purchasing the chiller, which can extend the life of the industrial chiller, and at the same time reduce chiller failures, avoid affecting production, and reduce the company's maintenance costs and create unnecessary trouble. So how should the chiller be maintained?
1. If there is an alarm failure in the water chiller, you can press the alarm button first and then troubleshoot one by one. Note: Do not forcibly start the chiller equipment before troubleshooting. Forcible start-up will cause unnecessary trouble and may damage the entire unit.
2. Clean the condenser, evaporator, and heat dissipation pipes regularly. I recommend that you perform cleaning work every six months to ensure that the chiller will not malfunction.
3. After purchasing the chiller and using it for aperiod of time, check whether the refrigeration oil and lubricating oil are contaminated. If so, please replace them immediately to ensure that the compressor can operate normally, thereby increasing work efficiency.
4. Water-cooled chillers need to clean the cooling water tower and clean the impurities in the water tank, because there are various impurities in tap water and long-term use will accumulate dirt.
5. For air-cooled chillers, please note that after starting up, first check whether the fan rotation is correct. If the fan is reversed, the power cord may be connected reversely. At this time, just turn off the chiller, adjust the fan rotation and start it again.
6. Before installing the chiller, be sure to choose a good location and place it where the surrounding air can circulate, so as to ensure that the industrial chiller has a good heat dissipation environment and avoid high temperature alarms.
7. Check whether the filter is normal or blocked. If this happens, it must be replaced in time to ensure the normal operation of the chiller.
The above is the maintenance method summarized for everyone. It is recommended that you save it for easy viewing.