News

Shell and tube heat exchangers are also known as shell and tube heat exchangers. It is a partition heat exchanger with the wall surface of the tube...

Partition wall heat exchanger with plate as heat transfer surface. This type of heat exchanger has a compact structure and a large heat transfer ar...

Use high-pressure water to clean the sludge, algae and other impurities in the pipeline and close the system.

The heat exchanger should not be deformed, and the fasteners should not be loose or other mechanical damage.

The control parameters of plate heat exchanger are heat exchanger material, working pressure and design temperature.

High heat transfer capacity, K value of heat transfer coefficient is in the range of 3000 ~ 8000 W / (m · K), which is higher than other heat excha...

The main manifestations are leakage (small amount, discontinuous water droplets) and leakage (large amount, continuous droplets). The main parts of...

The detachable plate heat exchanger is formed by pressing a number of corrugated thin plates at certain intervals, sealed by gaskets around them, a...

High efficiency and energy saving: its heat transfer coefficient is 3000 ~ 4500kcal / m · ° C · h, which is 3 ~ 5 times higher than the heat effici...

The plate type or corrugated type should be determined according to the actual needs of the heat exchange occasion.

Refrigeration: used as condenser and evaporator. HVAC: intermediate heat exchangers for boilers, intermediate heat exchangers for high-rise buildin...

Among them, welded plate heat exchangers are divided into: semi-welded plate heat exchangers, fully welded plate heat exchangers, plate and shell h...