Our well-equipped facilities and exceptional good quality manage throughout all stages of production enables us to guarantee total shopper satisfaction for outdoor wood boiler hot water heat exchanger, brazed heat exchanger, Tube Bundle Heat Exchanger. We hope that employees have a strong sense of self-responsibility and dedication, in order to achieve the goal, and perseverance to overcome the setbacks encountered in the work. Our company always pays attention to enterprise management, product quality and new technology development, and has a complete set of pre-sale, sale and after-sale service system.
Packaged plate heat exchanger
The material, quantity, size and arrangement of the plate depend on the operating condition. The gasket is located in the gasket groove around the plate. Around the opening, the gasket is a double ring shape, which can prevent the two media from leaking to each other. When the gasket is damaged, the medium is directly drained out of the heat exchanger.
After the plate heat exchanger is clamped, because of the sealing and isolation of the gasket, through the channel hole of the plate, two different media can be in two alternate channels, reverse flow, exchange heat with each other. The special design of shuripu plate can greatly improve the heat transfer efficiency.
Material Design and Selections
Material Selection | ||
Plate Material | SUS304, SUS316L, SMO254, Ti, Ni, Hastelloy |  |
| Gasket Material | NBR, HNBR, EPDM,Viton/Flurorubber,Chloroprene, Silicone Rubber |  |
| Frame Material | Carbon Steel, Stainless Steel |  |
| *For specific requirements, please contact us for confirmation | ||
Product Advantages
●Safety
●High heat transfer efficiency
●Small floor area
●Cost-effective
●Low fouling coefficient
●Convenient cleaning
Plate and Frame Heat Exchanger
Applications
Waste Heat Recovery
Food & Beverage
Petrochemical Industry
Mining Industry
Water Heating
Real Case Show 
For example, when the flow rate corresponding to the determined heat exchange area in the table is twice that of the flow rate used, the flow rate in the heat exchange runner can be doubled to reach the appropriate flow rate by adopting the dual-flow assembly form. The two flow channels can use different flow numbers according to different flow rates. As the number of processes increases, so does the resistance. For heat exchangers heated by steam, the steam side should generally be installed in the form of a single flow, in order to facilitate the full entry of steam and smooth discharge of condensed water.
Other Information
Please contact us
Contact: Ms.Luna
Email:luna@tranp.cn
We will continue to uphold the business philosophy of'focusing on technology, focusing on quality, focusing on service, and creating value for customers' and continue to increase investment, and will provide cost-effective 1 Year Warranty Copper Brazed Plate Heat Exchanger for Chiller System Bphe to give back to our customers. Honesty to customers, employees, and society are our important intangible assets, therefore, we insist on winning customers with integrity, and gaining customers' trust and respect with sincerity. We establish an excellent corporate culture and hope that employees can work happily in a warm corporate environment.