Our company has very rich practical experience in the field of High Pressure Vessel, Pressure Vessel, Plate Type Air Heat Exchanger, relying on a perfect management system and after-sales service, and strive to make our customers satisfied with our products. We are willing to cooperate sincerely with standardization organizations and various industrial companies to improve the quality of Chinese products and meet the severe challenges of economic globalization. We will supplement the global marketing network system to ensure the unlimited extension of the brand into the future. We'll make a amazing long run in hair output with our companions.
The complete set of closed cooling tower equipment consists of the main machine, water tank, circulating water pump and electric control cabinet. The main unit consists of housing, heat exchanger, fan, spray water pump, water collector, water tank and pipeline valve.
The working principle of the closed cooling tower is that the higher temperature water from the condenser, absorb or process equipment is sent to the cooling coil of the closed cooling tower by the cooling water circulation pump under pressure. On the other hand, the water in the bottom of the cooling tower is sucked into the spray pipe by using a pipe spring, and then sprayed on the outer surface of the cooling coil to evaporate and absorb the heat of the cooling water, so that the temperature of the cooling water is reduced.
At the same time, the suction effect of the fan installed above the baffle plate allows air to flow through the cooling coil from bottom to top, which not only strengthens the heat release on the outer surface of the cooling coil, but also takes away the evaporation formed in time. Water vapor to accelerate the evaporation of water and improve the cooling effect. Specifically, the higher temperature water in the cooling coil transfers heat to the inner surface of the cooling coil in the form of convection, and this part of the heat is transferred from the inner surface of the cooling coil to the outer surface of the cooling coil. Because the outer surface of the cooling coil is sprayed with circulating water, the circulating water falls on the outer surface of the cooling coil, and this part of the heat is dissipated into the air by convection and evaporation.
To conclude, closed type cooling tower is to be installed in large plant, with a purpose to condensate water via water drop evaporation, and also indirect cooling in cooling coils. Please contact to Tranp salesperson for a selection, and kindly send requirements including water temperature, flow rate, local humidity, as well as tower capacity along with the requests.
Our company has always maintained a leading position in the industry for Dry and Wet Combination Type Closed Loop Cooling Tower. We believe we can satisfy with you. Our items have been obtained more and more recognition from foreign clients, and established long term and cooperative relationship with them.